This is the musician's amplifier. A new classic design with a conventional power supply to insure the highest performance and best value available. This power supply features over 124,000uF of energy storage, so that every bass not is guaranteed to be heard. Several modes range in power from 1000 watts to 1500 watts per channel at 2 ohms and at 4 ohms, all three models range in power from 725 watts to 1500 watts per channel. BGW's legendary modular design, unibody welded steel chassis construction and conservative multiple protection circuits make the X Series perfect for every gig. Even the front panel graphics say "Musician!"
Topology
Input
Balanced XLR
One 21 position detented rotary control precision input attenuator per channel. One (1) dB attenuation steps.
11 kΩ
0.775 Vrms for rated 8 ohm output
29.9 dB
XLR Pinout (Pin 1 = Ground, Pin 2 = Positive, Pin 3 = Negative)
Power Output
475 W/ch @ 8Ω, 725 W/ch @ 4Ω, 1000 W/ch @ 2Ω (Stereo Mode), 1275 W @ 8Ω, 1750 W @ 4Ω (Bridged Mono)
<0.008%
1.0%
<0.008%
20 V/µs (Stere Mode), 40 V/µs (Mono Mode)
>300:1 (ref. 8Ω) below 50 kHz
>90 dB @ 20 Hz - 20 kHz
±10 mV (5 mV typical)
4/8 Ω
8 Hz - 56 kHz, +0/-3 dB; 20 Hz - 20 kHz, +0,-0.3 dB
> 110 dB < 440 W (unwtd.) bal.
Speaker Outputs
Power and Dimensions
10 A @ 100 V, 8 A @ 120 V, 5 A @ 230 V AC 50-60 Hz
18.8" x 19" x 5.25" (LxWxH in inches)
Up to 60 lbs.
