Designed for contractors, this new series offers a conventional power supply for high reliability and value. This power supply contains over 124,000uF of energy storage to ensure that BGW bass response. Power ranges from 725 watts to 1500 watts per channel at 4 ohms and 200 watts to 1400 watts at 70 volts (no autoformers required) in three models. BGW's legendary modular design allows for less down time if there is a problem. Created with the contractor for the contractor, the 1dB precision stepped attenuators are on the rear panel where contractors like them. The VX Series is the ideal for use in fixed installations where the highest sound quality and reliability are a must. The faastLink™ interface is optional.
Topology
Input
Balanced XLR
One 21 position detented rotary control precision input attenuator per channel. One (1) dB attenuation steps.
11 kΩ
0.775 Vrms for rated 8 ohm output
34.7 dB
XLR Pinout (Pin 1 = Ground, Pin 2 = Positive, Pin 3 = Negative)
Power Output
900 W/ch @ 8Ω, 1500 W/ch @ 4Ω, 1300 W/ch @ 2Ω (Stereo Mode), 2300 W @ 8Ω (Bridged Mono)
<0.008%
1.0%
<0.008%
20 V/µs (Stere Mode), 40 V/µs (Mono Mode)
>300:1 (ref. 8Ω) below 50 kHz
>90 dB @ 20 Hz - 20 kHz
±10 mV (5 mV typical)
4/8 Ω
8 Hz - 56 kHz, +0/-3 dB; 20 Hz - 20 kHz, +0,-0.3 dB
> 110 dB < 880 W (unwtd.) bal.
Speaker Outputs
Power and Dimensions
15 A @ 100 V, 12 A @ 120 V, 7.5 A @ 230 V AC 50-60 Hz
18.8" x 19" x 5.25" (LxWxH in inches)
Up to 70 lbs.
