| BGW GTB Specifications |
| IHF Method 4% Duty Cycle Burst Power |
Bridged Mono |
Dual Channel |
| 8 Ohms |
1300 W |
400 W/ch |
| 4 Ohms |
2000 W |
675 W/ch |
| 2 Ohms |
|
1000 W/ch |
| Intermodulation Distortion |
less than 0.03% at rated 8 ohm power output (SMPTE method, 60 Hz & 7 kHz, 4:1 ratio) |
| Rise Time |
4 µs |
| Slew Rate |
20 V/µs (stereo mode), 40 V/µs (mono mode) |
| Damping Factor |
> 400:1 (ref. 8 ohms) below 500 Hz |
| Small Signal Frequency Response |
3 Hz - 85 kHz, +0/-3 dB
20 Hz - 20 kHz, +0,-0.2 dB |
| Crosstalk |
At least 95dB at 20Hz, at least 75dB at 1kHz, and at least 55dB at 20kHz |
| DC Offset Voltage |
less than 10 mV |
Hum and Nose Level
(8 ohms 20 Hz - 20 kHz) |
> 108 dB < 200 W (unwtd.) bal.,
> 105 db < 200 W (unwtd.) bal. |
| Voltage Gain |
30 db/ch |
Input Impedance
(@ 8 ohm rated power) |
15k ohms |
| Input Sensitivity |
1.54 Vrms for rated 8 ohm output |
| Power Requirement |
100, 110, 120, 200, 220, 240VAC, 50-60Hz;
(20 amp circuit for 120V nominal) |
| Dimensions |
5.25 X 19 X 13 (inches) |
| Weight |
50 lbs (22.7 kg.) net, 57 lbs (26 kg.) shipping |
| Control |
One 22 position detented rotary control precision input attenuator per channel. Attenuation steps of 0, -2 through -30 dB (2 dB steps), -33, -36, -42, -50, -60 |
| Plarity Convention |
XLR pin 2 hot/tip, pin 3 -/ring, pin 1 ground/sleve |
| Warranty |
3 Years standard, parts/labor |
| ProNet Price |
$ 1,599.00 |
| Applications |
Live Sound, Permanent Installation |
C Series
